IC Chips - PIC12F683

PIC12F683
8-Pin Flash-Based, 8-Bit CMOS Microcontrollers with nanoWatt Technology
PDF datasheet

Pin	Symbol	Description
1	VDD	Positive supply
2	GP5/T1CKI/OSC1/CLKIN	GPIO 5, Timer1 clock, Crystal/Resonator, External clock input
3	GP4/AN3/T1G /OSC2/CLKOUT	GPIO 4, A/D Channel 3 input, Timer1 gate, Crystal/Resonator, FOSC/4 output
4	GP3/MCLR /VPP	GPIO 3, Master Clear, Programming voltage
5	GP2/AN2/T0CKI/INT/COUT/CCP1	GPIO 2, A/D Channel 2 input, Timer0 clock input, External Interrupt, Comparator 1 output, Capture input/Compare output/PWM output
6	GP1/AN1/CIN-/VREF/ICSPCLK	GPIO 1, A/D Channel 1 input, Comparator 1 input, External Voltage Reference, Serial Programming Clock
7	GP0/AN0/CIN+/ICSPDAT/ULPWU	GPIO 0, Comparator 1 input, Serial Programming Data I/O, Ultra Low-Power Wake-up input
8	VSS	Ground reference

Specifications
(typical values under recommended operating conditions, unless specified)

Notes
The Low Pin-count (8) PIC ®Flash microcontroller products offer all of the advantages of the well recognized mid-range x14 architecture with standardized features including a wide operating voltage of 2.0-5.5 volts, on-board EEPROM Data Memory, and nanoWatt Technology. Standard analog peripherals include up to 4 channels of 10-bit A/D, an analog comparator module with a single comparator, programmable on-chip voltage reference and a Standard Capture/Compare/PWM (CCP) module.

Notes

The Low Pin-count (8) PIC ®Flash microcontroller products offer all of the advantages of the well recognized mid-range x14 architecture with standardized features including a wide operating voltage of 2.0-5.5 volts, on-board EEPROM Data Memory, and nanoWatt Technology. Standard analog peripherals include up to 4 channels of 10-bit A/D, an analog comparator module with a single comparator, programmable on-chip voltage reference and a Standard Capture/Compare/PWM (CCP) module.