DIGIT 4	1  •	28	GND
DIGIT 6	2	27	DIGIT 7
DIGIT 3	3	26	DIGIT 5
DIGIT 1	4	25	DIGIT 2
ID6	5	24	DIGIT 8
ID5	6	23	SEG g
ID7	7	22	SEG f
WRITE	8	21	SEG e
MODE	9	20	SEG c
ID4	10	19	Vcc
ID1	11	18	SEG d
ID0	12	17	SEG b
ID2	13	16	SEG a
ID3	14	15	DP

Pin	Symbol	Description
1	DIGIT 4	digit 4 cathode
2	DIGIT 6	digit 6 cathode
3	DIGIT 3	digit 3 cathode
4	DIGIT 1	digit 1 cathode
5	ID6	data bit 6 (HEXA/CODE-B )
6	ID5	data bit 5 (DECODE )
7	ID7	data bit 7 (DATA COMING)
8	WRITE	write (active low, low-to-high edge triggered)
9	MODE	mode select (control or data word)
10	ID4	data bit 4 (SHUTDOWN )
11	ID1	data bit 1
12	ID0	data bit 0
13	ID2	data bit 2
14	ID3	data bit 3
15	DP	decimal point anode
16	SEG a	segment a anode
17	SEG b	segment b anode
18	SEG d	segment d anode
19	Vcc	supply voltage
20	SEG c	segment c anode
21	SEG e	segment e anode
22	SEG f	segment f anode
23	SEG g	segment g anode
24	DIGIT 8	digit 8 cathode
25	DIGIT 2	digit 2 cathode
26	DIGIT 5	digit 5 cathode
27	DIGIT 7	digit 7 cathode
28	GND	ground

Specifications
(typical values under recommended operating conditions, unless specified)

Parameter	Value	Unit
Display scan rate	390	Hz
Inter-digit blanking time	10	µs
Write pulse width	100 (low) 540 (high)	ns
Mode setup time	150	ns
Data setup time	160	ns
Minimum digit drive capability	50	mA
Segment driver output impedance	100	Ω
Peak current drive per segment	10	mA