Integrated Circuits |
---|
LF347 |
---|
Wide bandwidth quad JFET-input operational amplifier |
PDF datasheet |
1OUT | 1 • | 14 | 4OUT |
1IN- | 2 | 13 | 4IN- |
1IN+ | 3 | 12 | 4IN+ |
Vcc | 4 | 11 | Vss |
2IN+ | 5 | 10 | 3IN+ |
2IN- | 6 | 9 | 3IN- |
2OUT | 7 | 8 | 3OUT |
Pin | Symbol | Description |
---|---|---|
1 | 1OUT | output 1 |
2 | 1IN- | inverting input 1 |
3 | 1IN+ | non-inverting input 1 |
4 | Vcc | positive supply voltage |
5 | 2IN+ | non-inverting input 2 |
6 | 2IN- | inverting input 2 |
7 | 2OUT | output 2 |
8 | 3OUT | output 3 |
9 | 3IN- | inverting input 3 |
10 | 3IN+ | non-inverting input 3 |
11 | Vss | negative supply voltage |
12 | 4IN+ | non-inverting input 4 |
13 | 4IN- | inverting input 4 |
14 | 4OUT | output 4 |
Specifications |
---|
(typical values under recommended operating conditions, unless specified) |
Parameter | Value | Unit |
---|---|---|
Supply voltage |
8 (min) 36 (max) |
V |
Maximum offset voltage | 5 | mV |
Gain bandwidth | 4 | MHz |
Slew rate | 13 | V/µs |
Voltage noise | 20 | nV/√Hz |
Supply current (per channel) | 1.8 | mA |
Note |
---|
Data is maintained by an independent source and accuracy is not guaranteed. Check with the manufacturer's datasheet for up-to-date information. |
BACK |